渐开线斜齿轮（helical gear）是一种常见的传动装置，它通过斜面齿轮的咬合实现转动的传递。在工程学和机械设计中，渐开线斜齿轮被广泛运用于各种设备和机械系统中。同时，involute型齿轮也是其中的一种特殊类型，其齿形能够保持相对于基圆的特定角速度。这种设计使得齿轮传动更加平稳和高效。应用于实际生产中的helical gear常常能够实现更加精准的转动并降低噪音和振动。下面是一些关于渐开线斜齿轮的英语短句例句，这些短句可以帮助工程师和设计师更好地理解和运用这一技术原理。
渐开线斜齿轮,involute helical gear
1)involute helical gear渐开线斜齿轮
1.Parametric and precise design ofinvolute helical gear based on UG基于UG的渐开线斜齿轮参数化精确造型设计
2.Introduces the method ofinvolute helical gear 3D modeling in Ansys software.介绍了ANSYS环境下的渐开线斜齿轮的三维建模方法。
3.This paper analysed the modeling process ofinvolute helical gear applying the parametric modeling method based on Pro/E Wildfire 4.0为开发平台,应用参数化建模方法分析了渐开线斜齿圆柱齿轮参数化建模的过程,并且通过应用Pro/E的族表功能和Pro/program二次开发平台建立了渐开线斜齿轮参数化模型库。
英文短句/例句
1.The Method of Using SolidWorks to Design Involute Helical Gear Accurately用SolidWorks精确设计渐开线斜齿轮的方法
2.Tooth root stress analysis of involute helical gear based on ANSYS基于ANSYS的渐开线斜齿轮的齿根应力分析
3.The most evil precise load handling and optimization methods of involute helical gear渐开线斜齿轮的最恶加载精确处理与优化方法
4.Parametric and precise design of involute helical gear based on UG基于UG的渐开线斜齿轮参数化精确造型设计
5.Study on the method of parametric molding for the involute helical gears based on Pro/Engineer基于Pro/E的渐开线斜齿轮参数化造型方法研究
6.Study on the method of molding of parameterc for the involute helical gears based on Pro/Engineer渐开线斜齿轮Pro/E参数化建模方法研究
7.Parametric Design of Involute Helix Gear Based on Pro/E 3.0基于Pro/E3.0渐开线斜齿轮的参数化造型设计
8.Parametric Design of Standard Involute Helical Gears Based on Pro/E Wildfire基于Pro/Engineer标准渐开线斜齿圆柱齿轮参数化设计
9.Study of Involute Spur Gear Pair with Modified Factor" Limit Value渐开线斜齿圆柱齿轮变位系数极值研究
10.Parameterized design of cylindrical involute helical gear using UG利用UG对渐开线斜齿圆柱齿轮参数化设计
11.involute internal gear pair with small teeth difference渐开线少齿差内齿轮副
12.involute milling cutter for straight bevel gear直齿伞齿轮渐开线铣刀
13.Parametric Design for Involute Helical Cylindrical Gear Basing on Relations of Pro/E基于Pro/E关系式的渐开线斜齿圆柱齿轮参数化设计
14.Abstract: In this paper, the formula of calculation of the axial profile of an involute helical gear( or an involute helicoid worm) is inferred.文摘:渐开线圆柱斜齿轮，当齿数很少而螺旋角很大时，可以看作渐开线圆柱蜗杆。
15.Research on the tooth root stress of the involute arc cylindrical gear渐开线弧齿圆柱齿轮的齿根应力分析
16.Study on the Cutting Gear Method of Generating Shape Line Based on Involute Gear基于渐开线齿轮的产形线切齿法研究
17.3D Simulation and Finite Element Analysis of an Involute Cylindrical Worm and Helical Gear Drive;渐开线圆柱蜗杆斜齿轮传动的3D仿真和有限元分析
18.The Practical Involute Equation under Cartesian Coordinates System齿轮轮齿齿廓渐开线的实用直角坐标方程研究
相关短句/例句
Involute helical gear渐开线斜齿圆柱齿轮
1.Finite element model and analysis of involute helical gear based on ANSYS;基于ANSYS渐开线斜齿圆柱齿轮的有限元建模及分析
3)modeling of involute helix gear渐开线斜齿轮三维造型
4)involute gear渐开线齿轮
1.Confirmation of the measuring teeth number ofinvolute gear common normal;渐开线齿轮公法线跨测齿数的确定
2.Accurate modeling of Involute gear machined by the principle of generation of curve;基于曲线的生成原理实现渐开线齿轮的实体建模
3.Exactitude Modeling of Involute Gear on Pro/E;基于Pro/E的渐开线齿轮精确建模
5)Involute gears渐开线齿轮
1.This article introduced the three-dimensional molding design for involute gears based on SolidWorks,and put forward four methods of parameterized entity design of gears aiming to extend the application of SolidWorks in gear fields and to improve the efficiency of gear designing.结合计算机辅助设计/制造的需要,基于SolidWorks软件平台,对渐开线齿轮的三维造型方法进行了探讨,提出了在SolidWorks环境下实现参数化齿轮实体设计的四种方法。
2.This paper introduces the method of realization parameterized design of cylindrical involute gears based on unigraphics NX after inducing the general structure of cylindrical involute gears, and composers can get the new needed roughcast quickly by applying the models.在Unigraphics环境下,在归纳了常见圆柱渐开线齿轮的结构基础上,利用其成形特征和表达式功能实现圆柱渐开线齿轮齿坯的参数化设计方法,可使设计人员能应用现有的模型进行更新设计,提高设计效率,并介绍了利用表达式、规律曲线和螺旋功能实现圆柱齿轮(直齿和斜齿)的精确建模。
3.This paper introduces in detail some measuring and determining metho ds of the parameters of the straight and inclined involute gears that are more p ractical in the actual work.详细介绍了实际工作中较实用的直齿渐开线齿轮、斜齿渐开线齿轮参数的测量与确定方法。
6)involutes gear渐开线齿轮
1.Numerical analysis for the elastohydrodynamic lubrication ofinvolutes gear by a non-Newtonian medium;渐开线齿轮传动非牛顿润滑介质的线弹流数值分析研究
2.Through slicing and analyzing the model,contact stresses ofinvolutes gear were measured and analyzed by using Hertz contact theory and finite element method.根据相似原理将模型在载荷作用下进行应力冻结;通过模型切片及分析对渐开线齿轮接触应力进行测量,并采用赫兹接触理论和有限元方法分析渐开线齿轮的接触应力。
延伸阅读
齿轮轮齿渐开线、螺栓、弹簧autolsp源程序一、齿轮轮齿渐开渐开线(defun c:gear(/)(setqp0 (getpoint"输入齿轮中心p0: ")m (getreal"输入齿轮模数M: ")z (getint"输入齿轮齿数Z: ")ha 1c 0.25a (/ pi 9)ra(/ (* (+ z (+ ha ha)) m) 2)rf(/ (* (- z (+ (+ ha ha) c)) m) 2)r(/ ( * m z) 2)rb ( * r (cos a))ri rbang 0g (polar p0 ang rb))(command "circle" p0 ra)(command "circle" p0 rf)(command "circle" p0 r)(command "line" g) (while (< ri ra)(setqang ( + ang(/ pi 360))ri ( / rb (cos ang))cta ( - (/ (sin ang) (cos ang)) ang)g(polar p0 cta ri))(command g))(command ) )二、螺旋源程序(defun errMsg (s) (if (/= s "function cancelled") (princ (strcat "nError: " s))) ; 当命令执行时出现错误 (setvar "cmdecho" ocmdold) ; 例如用户按下了CTRL + C (setvar "osmode" osmold) (setq *error* olderr) ; 恢复旧的错误处理 (princ))(defun c:3Dthread (/ radouter threadpitch threadlength threadangle ptStart innerdiafactor radmid radinner ocmdold osmold 4H 5H 6H h6 g6) ;------------------------------------------------------------------- ; 获取公制外径大小、螺距总长 ; 然后计算一系列几何点 ; 并且关闭对象捕捉、命令回显 ;------------------------------------------------------------------- (setq 4H (list 0.0015 0.002 0.002 0.0025 0.003 0.0035 0.004 0.005 0.006 0.007 0.008 0.009 0.010)) (setq 5H (list 0.002 0.0025 0.003 0.004 0.0045 0.0055 0.0065 0.0075 0.009 0.010 0.0115 0.0125 0.0135)) (setq 6H (list 0.003 0.004 0.0045 0.0055 0.0065 0.008 0.0095 0.011 0.0125 0.0145 0.016 0.018 0.020))
