Mg-Zn-Y-Zr合金是一类新型的镁合金材料,具有优异的力学性能和耐腐蚀性能。该合金主要由镁、锌、钇和锆四种金属元素组成,因此在各种工业应用中备受青睐。Mg-Zn-Y-Zr合金在航空航天、汽车制造、电子设备等领域具有广泛的应用前景。其优越的机械性能和抗腐蚀性能使其成为一种理想的结构和功能材料。本文将介绍Mg-Zn-Y-Zr合金材料的特点、制备工艺和应用范围,结合实际例子呈现这一材料在工程应用中的潜力和价值。
Mg-Zn-Y-Zr合金,Mg-Zn-Y-Zr alloy
1)Mg-Zn-Y-Zr alloyMg-Zn-Y-Zr合金
英文短句/例句
1.Heat treatment of Mg-Zn-Y-Zr alloy rolling sheetMg-Zn-Y-Zr合金轧制板材的热处理
2.Hot Tearing Susceptibility of Mg-Zn-Y-Zr AlloysMg-Zn-Y-Zr合金热裂敏感性的研究
3.Microstructures and Properties of Rapidly Solidified Mg-Zn-Y-Zr Alloy Ribbons快速凝固Mg-Zn-Y-Zr合金条带的组织和性能研究
4.The Study of Mg-Zn-Y-Zr Alloys" Microstructure and Properties;Mg-Zn-Y-Zr系合金组织与性能研究
5.Microstructure and mechanical properties of Mg-Y-Zn-Zr AlloyMg-Y-Zn-Zr合金的显微组织和力学性能
6.Effects of Y Content on Microstructure and Properties of Mg-Y-Zn-Zr AlloyY含量对Mg-Zn-Zr合金组织和性能的影响
7.Preparation of Mg-Li Mg-Li-Zr Zn-Zr Alloys by Electrolysis in Molten Salt;熔盐电解制取Mg-Li Mg-Li-Zr Zn-Zr合金
8.Study on the Phase Selection and Solidification Kinetics of Sub-Rapidly Solidified Mg-Zn-Y(-Zr) Alloys;亚快速凝固Mg-Zn-Y(-Zr)合金的相选择及凝固动力学研究
9.Study on the Fluidity and Hot Tearing Behavior of Mg-Gd-Y-Zr AlloysMg-Gd-Y-Zr合金的热裂和流动性研究
10.Elevated Aging Behavior of Mg-Gd-Y-Zr AlloyMg-Gd-Y-Zr合金的高温时效行为研究
11.Homogeneity of Mg-Gd-Y-Nd-Zr alloy as-castMg-Gd-Y-Nd-Zr合金铸锭的均匀化
12.Thermal-physical Properties of Two Kinds of Mg-Gd-Y-Zr Magnesium Alloys两种Mg-Gd-Y-Zr镁合金的热物理性能
13.Oxide Inclusion in Cast Mg-Gd-Y-Zr Alloy铸造Mg-Gd-Y-Zr合金氧化夹杂研究
14.Hot Crack Susceptibility of Mg-Gd-Y-Zr Magnesium AlloyMg-Gd-Y-Zr合金的热裂性能
15.The Microstructure and Properties of In-situ Quasicrystal Reinforced Mg-Zn-Y and Mg-Zn-Y-Al Alloys Fabricated by Common Solidification Technique;普通凝固准晶增强Mg-Zn-Y及Mg-Zn-Y-Al合金组织与性能
16.The Microstructures and Mechanical Properties of Mg-Zn-Y Magnesium Alloys;Mg-Zn-Y合金的组织与力学性能研究
17.Study on the Microstructures and Thermophysical Properties of Mg-Zn-Y Alloys;Mg-Zn-Y合金的组织与热物性研究
18.Study on the Microstructures and Corrosive Properties of Mg-Zn-Y Alloys;Mg-Zn-Y合金组织与腐蚀性能的研究
相关短句/例句
Mg-Y-Zn-Zr magnesium alloyMg-Y-Zn-Zr镁合金
3)Mg-Zn-Zr alloyMg-Zn-Zr合金
1.The effects of aging on the hardening and softening ofMg-Zn-Zr alloy was studied at 438K and 473K.研究了Mg-Zn-Zr合金在438K和473K时效过程中的硬化软化现象。
4)Mg-Zn-Y alloyMg-Zn-Y合金
1.Effects of Yttrium on Microstructure and Mechanical Properties of Mg-Zn-Y Alloys;Y含量对Mg-Zn-Y合金组织和性能的影响
2.Formation and characteristics of quasicrystalline phaseinMg-Zn-Y alloy;Mg-Zn-Y合金中准晶相的形成与结构表征
3.Research on Microstructure and Mechanical Properties of Mg-Zn-Y Alloy;Mg-Zn-Y合金的显微组织与力学性能研究
5)Mg-Zn-Y alloysMg-Zn-Y合金
1.Effects of the corrosion rate of rapidly solidified(RS) Mg-Zn-Y and conventionally solidified(CS)Mg-Zn-Y alloys were studied using weightless method,and the corrosion potential and corrosion current were measured by polarization curves.结果表明,Mg-Zn-Y合金快速凝固后的组织明显细化,合金成分及组织均匀,偏析减少;在室温下,腐蚀速率随着时间的推移先增大后减小,随着pH值的增加而减小,随着氯化钠溶液浓度的增大而增大;在氯化钠溶液体系中的腐蚀形式均由局部腐蚀(点蚀)演变为全面腐蚀,腐蚀后的主要产物是Mg(OH)2。
2.The compositions ofMg-Zn-Y alloys are Mg94.Mg-Zn-Y合金成分为Mg94。
3.To abroad the applications of Mg alloys, this paper study the influence of conventional solidification, rapid solidification (RS) and reciprocating extrusion (RE) to the microstructures and erosion resistance ofMg-Zn-Y alloys, as well as the corrosion mechanism of RSMg-Zn-Y alloys in NaCl solution.为了扩大镁合金的使用范围,本文研究了普通凝固、快速凝固和往复挤压三种工艺对Mg-Zn-Y合金的组织和耐蚀性的影响,并分析了快速凝固Mg-Zn-Y合金在NaCl溶液的腐蚀机理。
6)Mg-Y-Zn alloyMg-Y-Zn合金
1.They also report theMg-Y-Zn alloy, whose composition proportion is in the rangeof Mg-1~3at%Zn-2~6at%Y, has the excellent property.本文也对铸态Mg-Y-Zn合金的摩擦磨损特性作了系统的研究,对比研究了Mg_(97)Zn_1Y_2合金和商业应用AZ91D的磨损机制,分析了镁基合金中不同第二相对磨损性能的影响;该论文也研究了激光表面处理Mg_(96)Zn_1Y_3合金组织和摩擦磨损性能;该部分提供了镁合金摩擦磨损性能方面的基础性数据。
延伸阅读
东北轻合金加工厂生产的铝合金挤压管材和空心材东北轻合金加工厂生产的铝合金挤压管材和空心材睽铝合;;:;;;、:;产的