受弯构件（flexural member）在工程学中扮演着重要的角色，它们承受着弯曲力和压力，通常用于桥梁、楼梯、梁和柱等结构中。在英语中，描述受弯构件的短句和例句对于工程专业人士和学生来说至关重要。这些例句不仅帮助他们理解受弯构件的概念和应用，还可以帮助他们更好地进行专业交流和研究。本文将收集整理关于受弯构件的英语短句和例句，旨在为相关领域的学习者和从业人员提供一个全面的参考资料，以便更好地理解和应用受弯构件的知识。
受弯构件,flexural member
1)flexural member受弯构件
1.Calculation of carrying capacity of the normal section of a RCflexural member with round section;钢筋混凝土圆截面受弯构件正截面承载力计算
2.Simplified method of reinforcing the grouted concreteflexural members;现浇钢筋混凝土受弯构件加固补强简易方法
3.Simplied calculation to the minimum reinforcement ratio offlexural members to be content crack;满足裂缝要求的受弯构件最小配筋率的简化计算
英文短句/例句
1.Study on the Stability Behavior of Cold-Formed Steel Flexural Members冷弯薄壁型钢受弯构件稳定性能研究
2.Experimental study on bearing behavior of high strength cold-formed steel battens under bending高强冷弯薄壁型钢受弯构件受力性能试验研究
3.The Structural Property Research of Concrete Flexural Members Reinforced with Fiber Reinforced Polymer BarsFRP筋混凝土受弯构件的结构性能研究
4.Study on flexural behavior of pre-cracked RC beams strengthened with externally bonded CFSCFS加固开裂混凝土受弯构件的抗弯性能研究
5.Calculation for Cracking Moment of SRC Flexural Member型钢混凝土受弯构件开裂弯矩的计算初探
6.Research on Behavior of Flexural Member Based on Concrete Mechanics;基于混凝土力学的受弯构件性能研究
7.Analysis on Bearing Capacity of Corroded Reinforcement Members in Bending;锈蚀钢筋混凝土受弯构件承载力分析
8.Hysteretic Behaviors of Concrete Filled Circular CFRP-Steel Tubular Flexural Members圆CFRP-钢管混凝土受弯构件滞回性能
9.Study on recovery stress model of flexural members of reinforced concrete钢筋混凝土受弯构件恢复力模型研究
10.Experimental and Theoretical Study on Bending Bearing Behavior of 550MPa High Strength Cold-Formed Steel Purlins;550MPa高强冷弯薄壁型钢受弯构件受力性能试验与理论研究
11.Force Property Study of Flexural Member in High Strength Steel Reinforced Concrete;高强型钢混凝土受弯构件的受力性能研究
12.Study of Behavior and Strength on Cross Section of the Concrete Superpose Beam;叠合式受弯构件正截面承载力的受力性能分析
13.Mechanical behavior of flexural members of GFRP tube filled with steel reinforced concreteGFRP管钢骨混凝土受弯构件受力性能研究
14.Consistent method to predict shear capacity of deep flexural members一种预测深受弯构件受剪承载力的协调方法
15.Study on the Structural Performance of Laminated Veneer Lumber (LVL) Beams;单板层积材（LVL）受弯构件的结构性能研究
16.Study on the Structural Performance of Poplar Glued-Laminated Beams;速生树种集成材（Glulam）受弯构件结构性能研究
17.Experimental Study and Theoretical Analysis on Load Carrying Apacity of Cold-Formed Flexural Members with Thicknesses Less Than 2mm;壁厚小于2mm冷弯薄壁型钢受弯构件承载力试验研究及理论分析
18.Experimental and Theoretical Study of Elastic Critical Local Buckling Stress of the Cold-formed Steel Bending Members;冷弯薄壁型钢受弯构件截面弹性局部屈曲试验与理论研究
相关短句/例句
bending member受弯构件
1.Evaluation of strengthening ofbending member by early loading;初始荷载对受弯构件加固性能的影响评价
2.Thoughts on the partial revisions ofbending member s overall stabilization in new steel code;新钢规中受弯构件整体稳定部分条文修订分析
3.The right section strength calculation ofbending member using “ratio method”;用比例法进行受弯构件正截面强度计算
3)flexural members受弯构件
1.Control of crack width in reinforced concreteflexural members;钢筋混凝土受弯构件裂缝宽度控制
2.Deflection of preflex prestressed concreteflexural members;预弯预应力混凝土受弯构件的挠度计算
3.Experimental study on behavior of cold-formed steelflexural members with thickness less than 2mm壁厚2mm以下冷弯薄壁型钢受弯构件性能试验研究
4)member in bending受弯构件
1.Local critical buckling stress of the cross-section ofmember in bending with high-strength cold-formed steel;高强冷弯型钢受弯构件截面局部屈曲临界应力
2.The determination and application of theoretical point of cutting about reinforced concretes longitudinal tensile bar ofmember in bending;钢筋混凝土受弯构件纵向受力钢筋理论断点的确定及应用
bined with practical work the construction method and calculation steps of carbon fiber sheet in reinforcement treatment of concretemember in bending are introduced.通过工程实例具体说明采用碳纤维布加固混凝土受弯构件的具体方法和计算步骤,分析了碳纤维布加固混凝土受弯构件的适用条件,以推广该技术。
5)beam[英][bi:m][美][bim]受弯构件
1.Fatigue behavior of reinforced concretebeams strengthened wit hprestressed carbon fiber reinforced polymer plates预应力碳纤维板加固受弯构件的疲劳性能研究
2.Discussion on the method for calculating crack width of partial prestressed concretebeams部分预应力混凝土受弯构件裂缝宽度计算方法探讨
3.Based on the experiment of eight steel-reinforced light-weight concretebeams and two steel-reinforced concretebeams,the opening and distribution of cracks are studied and a comparison with two different aggregates has been made to find out wider cracks for light-concretebeams with smaller variations.通过对8根钢骨轻骨料混凝土梁和2根钢骨普通混凝土梁的试验,研究了钢骨轻骨料混凝土受弯构件在单调荷载作用下的裂缝开展与分布情况。
6)deep flexural member深受弯构件
1.Prediction of shear capacity of prestressed concretedeep flexural members based on modified strut-and-tie model;基于改进拉-压杆模型的预应力混凝土深受弯构件受剪承载力预测
2.Mechanic properties ofdeep flexural member and its calculation and construction in codes;浅谈深受弯构件受力特点与规范计算构造
3.Shear resistance for reinforced concretedeep flexural member;钢筋混凝土深受弯构件受剪承载力分析
延伸阅读
长春冷弯型钢总厂生产的异形冷弯型钢长春冷弯型钢总厂生产的异形冷弯型钢长春冷弯型钢总厂生产的异形冷弯型钢
